A wide range of interfaces for industrial applications Easy integration of graphical user interfaces via the multimedia interface
One of our most successful System on Modules of the last years you can find here in the portrait -.
Based on the i.MX35 product family from NXP (formerly Freescale), this SOM was specially developed for industrial applications and equipped with a wealth of interfaces that are used in the industrial sector. Additionally, a multimedia interface allows for easy integration of graphical user interfaces.
The ECUcore-iMX35 (embedded control unit) has also been realized as PLC variant for OpenPCS and CODESYS.
|
Physical |
||
|
Dimensions (L x W x H): 78 x 54 x 7.2 mm |
||
|
Weight: approx. 20 g |
||
|
Operating conditions |
Temperature: -40°C…+85°C, Humidity |
10–90% RH, non-condensing |
|
Power supply |
||
|
Power supply |
3.3 V ± 5%, 0.3 A max. |
|
|
CPU |
||
|
Controller |
Freescale i.MX357 with ARM11 core |
|
|
Clock frequency |
532 MHz |
|
|
Memory |
||
|
RAM |
128 MiB DDR2-SDRAM |
|
|
FLASH |
128 MiB NOR |
|
|
Mass storage |
MMC/SD cards Signals via board-to-board interface |
|
|
Connectivity |
||
|
On-board peripherals |
DMA, MMU, hardware watchdog, temperature sensor, RTC |
|
|
Fast Ethernet |
1x 10/100 Mbps, on-board PHY |
|
|
CAN |
2 |
|
|
UART |
3 |
|
|
USB |
1x USB 2.0, 12 Mbps full-speed, 1x OTG |
|
|
SPI/I2C |
1/1 |
|
|
LCD |
TFT-LCD interface routed via CMOS, resolution up to 800x600, max. 18-bit |
|
|
Board-to-board connectors |
2x 2x50-pin Header sockets, 1.27 mm pitch |
|
|
available via board-to-board connectors |
2x CAN, 3x ASC, 2x USB, I²C, SPI, 2x SD card, 18x GPIO, Ethernet, TFT-CMOS, 2x PWM/DIO, 2x Timer/Counter/DIO |
|
|
Software |
||
|
Operating system |
Linux with X Server and QT Framework |
|
|
Guidelines |
||
|
RoHS compliant |
yes |
|
|
Miscellaneous |
||
|
Integrated Development Environment (IDE) |
Eclipse-based IDE with GNU C/C++ toolchain, source and assembler-level debuggers |
|
|
Supplementary middleware |
CANopen® protocol stack source code, Ethernet POWERLINK protocol stack source code |
Get in touch now
Your contact person: Ralf Haag
Department: Sales Manager
Email: ralf.haag@systec-electronic.comPhone: +49 3765 38600 1127
