Numerous interfaces for industrial applications
Easy integration of graphical user interfaces through multimedia interface
One of our most successful System on Modules of the last years you can find here in the portrait -.
Based on the i.MX35 product family from NXP (formerly Freescale), this SOM was specially developed for industrial applications and equipped with a wealth of interfaces that are used in the industrial sector. Additionally, a multimedia interface allows for easy integration of graphical user interfaces.
The ECUcore-iMX35 (embedded control unit) has also been realized as PLC variant for OpenPCS and CODESYS.
Features / Details
Eigenschaften / Details
Size(L x W x H)
78 x 54 x 7.2mm
Temperature: -40°C...+85°C, Humidity: 10-90% RH, non-condensing
3.3V +/- 5%, 0.3A max.
Freescale i.MX357 with ARM11 core
128MiB DDR2 SDRAM
MMC/SD card signals via board-to-board interface
DMA, MMU, hardware watchdog, temperature sensor, RTC
1x 10/100Mbps, on-board PHY
1x USB 2.0, 12Mbps full speed, 1x OTG
TFT-LCD interface led out via CMOS, resolution up to 800x600 max. 18bit
2x 2x50pin header headers, 1.27 mm pitch
available via board-to-board connectors
2x CAN, 3x ASC, 2x USB, I²C, SPI, 2x SD-card, 18x GPIO, Ethernet, TFT-CMOS, 2x PWM/DIO, 2x Timer/Counter/DIO
Linux with X Server and QT Framework
Integrated Development Environment (IDE)
Eclipse based IDE with GNU C/C++ toolchain, source and assembler level debugger
CANopen® Protocol Stack Source Code, Ethernet POWERLINK Protocol Stack Source Code