sysWORXX USB-CANmodul1

Connection of CAN-bus with PC via USB

Support for all high-layer protocols through transparent tunneling of messages

The USB-CANmodul1, is a small-sized and very cost-effective CAN-bus interface solution for connecting the CAN-bus to the PC via USB. CAN messages are tunneled transparently - thereby the module can support all kind of higher-layer CAN-based protocols, such as CANopen, SDS, DeviceNet or J1939.* Its fast yet low-power 32-bit CPU core with integrated message buffers ensures reliable communication even at high busload. Each received CAN message gets a precise time stamp derived from the module’s hardware timer.

The provided PC driver allows for easy plug&play installation and supports simultaneous operation of up to 64 USB-CANmodul devices on the same PC.

An extremely attractive price-performance ratio and the compact design make this CAN USB Adapter ideal suited for CAN-bus based development, service and maintenance tasks, as well as use in high-volume serial products.

The USB-CANmodul1 has been tested according to the EMC Directive 2014/30/EU.

 

* On software side for e.g. J1939 support our CANinterpreter Add On as well as J1939 protocol stack is required.

Module Features

toggle fullscreen
Physical 
Size (LxWxH)

78 x 45 x 18mm

Weightapprox. 40g
Operating temperature-40 to +85ºC
Humidity10 to 95% non-condensing (VDE 0110)
Connectivity 
Available CAN channels:1
PC connection:USB V2.0 Full-speed
CAN interface:1 CAN interface, high-speed CAN according ISO 11898-2, optical isolated
CAN transceiver:high-speed CAN: 82C251
CAN specification:ISO 11898-1/2, Standard Frames, Extended Frames
CAN connector:SUB-D9
CAN bit rate:10kbps to 1Mbps
CAN bus features:Transmit Remote Frames
 Listen only mode, 100µs hardware time stamp for received messages, Tx message receipt with timestamp
 Automatically transmission of cyclical messages by the module, Hardware acceptance filter, Callback events for receive, status change and connect/disconnect
Software 
Software support for Windows® OS:USB-CANmodul Control - Configuration tool for managing multiple USB-CANmodul devices
PCAN View - a simple CAN monitor that allows for reception and transmission of CAN messages
Programmers support for Windows OS:Comprehensive programmers API including demo source for Microsoft Visual C++, LabView, Visual Basic .NET
CANopen API for .NET - based on SYS TEC CANopen Stack and allows for easy implementation of CANopen-enabled applications
Programmers support for Linux OS:SocketCAN based API
Device driver:Windows® 10, 8.1, 8, 7 (32/64 bit), Linux
Indicators 
LEDLEDs for power supply, CAN state, CAN traffic
Power Supply 
Power SupplyUSB powered
Current consumptiontyp. 150mA
Housing 
HousingTable case

Documents

NameTypeSizeAction
U
USB-CANmodul Series - Product Flyer
pdf 2 MB Download
USB-CANmodul - User Manual
pdf 3 MB Download
C
CANopen API for .NET - Software Manual
pdf 273 KB Download

Downloads

NameTypeSizeAction
U
USB-CANmodul Utility Disk
P/N SO-387 - V6.03 - Driver for Windows® 10, 8.1, 8, 7 (32/64 bit), LabView Please Note! This driver package does not support the obsolete versions GW-001, GW-002 and AT91 based units (3rd generation). Please check our download area for getting driver support for these obsolete versions!
zip 11 MB Download
USB-CANmodul Utility Disk - driver support for modules of 3rd (AT91) and 4th (STM32) generation
P/N SO-387 - V5.16 - Driver for Windows® 8.1, 8, 7 (32/64 bit), LabView Please Note! This driver package does not support the obsolete versions GW-001 and GW-002. Please check our download area for getting driver support for these obsolete versions!
ZIP 11 MB Download
C
CANopen API for .NET
P/N SO-1088 - V5.60 - Release March 2015
zip 53 MB Download
L
Linux SocketCAN Driver for USB-CANmodul series
Release Version V0.9.8
bz2 323 KB Download

Ordering Information

toggle fullscreen
P / NDescription
3204001-01

USB-CANmodul1
table-case, high-speed CAN transceiver 82C251, optically isolated

 

Your Salesteam from SYS TEC electronic

We would be glad to help you.