The USB-CANmodul1, is a small-sized and very cost-effective CAN-bus interface solution for connecting the CAN-bus to the PC via USB. CAN messages are tunneled transparently - thereby the module can support all kind of higher-layer CAN-based protocols, such as CANopen, SDS, DeviceNet or J1939.* Its fast yet low-power 32-bit CPU core with integrated message buffers ensures reliable communication even at high busload. Each received CAN message gets a precise time stamp derived from the module’s hardware timer.
The provided PC driver allows for easy plug&play installation and supports simultaneous operation of up to 64 USB-CANmodul devices on the same PC.
An extremely attractive price-performance ratio and the compact design make this CAN USB Adapter ideal suited for CAN-bus based development, service and maintenance tasks, as well as use in high-volume serial products.
The USB-CANmodul1 has been tested according to the EMC Directive 2014/30/EU.
* On software side for e.g. J1939 support our CANinterpreter Add On as well as J1939 protocol stack is required.
78 x 45 x 18mm
|Operating temperature||-40 to +85ºC|
|Humidity||10 to 95% non-condensing (VDE 0110)|
|Available CAN channels:||1|
|PC connection:||USB V2.0 Full-speed|
|CAN interface:||1 CAN interface, high-speed CAN according ISO 11898-2, optical isolated|
|CAN transceiver:||high-speed CAN: 82C251|
|CAN specification:||ISO 11898-1/2, Standard Frames, Extended Frames|
|CAN bit rate:||10kbps to 1Mbps|
|CAN bus features:||Transmit Remote Frames|
|Listen only mode, 100µs hardware time stamp for received messages, Tx message receipt with timestamp|
|Automatically transmission of cyclical messages by the module, Hardware acceptance filter, Callback events for receive, status change and connect/disconnect|
|Software support for Windows® OS:||USB-CANmodul Control - Configuration tool for managing multiple USB-CANmodul devices|
PCAN View - a simple CAN monitor that allows for reception and transmission of CAN messages
|Programmers support for Windows OS:||Comprehensive programmers API including demo source for Microsoft Visual C++, LabView, Visual Basic .NET|
CANopen API for .NET - based on SYS TEC CANopen Stack and allows for easy implementation of CANopen-enabled applications
|Programmers support for Linux OS:||SocketCAN based API|
|Device driver:||Windows® 10, 8.1, 8, 7 (32/64 bit), Linux|
|LED||LEDs for power supply, CAN state, CAN traffic|
|Power Supply||USB powered|
|Current consumption||typ. 150mA|
USB-CANmodul Utility Disk|
P/N SO-387 - V6.05 - Driver for Windows® 10, 8.1, 8, 7 (32/64 bit), LabView Please note - this package includes driver support for all standard module versions of 3rd (AT91) and 4th (STM32) generation
CANopen API for .NET|
P/N SO-1088 - V5.60 - Release March 2015
Linux SocketCAN Driver for USB-CANmodul series|
Release Version V1.0.1