Small & smart IoT control with connection to the cloud
Measure, track, control in proximity to sensor/actuator
Small & Fine: Industry 4.0-control with connection to the cloud for installation proximity to sensor/actuator
Our sysWORXX CTR-100 is a plug-in System on Module for cloud connection which is freely programmable by users. Unlike other IoT Chip devices, the SYS TEC electronic CTR-100 combines sensor2cloud
requirements with data preprocessing features ranging from time-critical signals to efficient control tasks. To that end, the CTR-100 comes with appropriate function libraries pre-installed, making
it ready for use straight away. Moreover our CTR-100 is prepared for the Cloud Services, such as IBM IoT Platform.
Functions
The sysWORXX CTR-100 is easy to integrate for use in Internet of Things/Industry 4.0 applications and the connecting devices/machines to the cloud as these fields require. Like every of our devices the CTR-100 is prepared for the direct connection to Cloud.
The benefits of the SYS TEC electronic CTR-100 lie in its use, security and cloud connection. On the chip are libraries and protocols such as MQTT, Modbus or CANopen which are ready to use immediately.
The templates supplied in the source code are available to users as a starting point for their own customisation. I²C and SPI make it possible to directly connect actuators and sensors.
This allows the entire measurement, control and regulation to be handled on the CTR-100. As a result, the chip works independently of the cloud. There is no additional gateway required for cloud connection.
Our sysWORXX CTR-100 delivers M2M communication at the highest level, as well as being efficient and available at a moderate cost.
Features / Details
Physical | |
|---|---|
Size (LxW) | 70x24mm |
Operating temperature | 0ºC … +70ºC |
Humidity | 10 - 95% non-condensing (VDE 0110) |
CPU | |
Controller / Core | STM32F767 / ARM 32-bit Cortex™-M7 |
Frequency (internal) | 200MHz |
Storage | |
RAM | 128kB for PLC Application |
Connectivity | |
ETH | 1x 10/100Mbps, on-board PHY + RJ45 plug |
CAN | 1 |
UART | 3 |
SPI | 1 |
I2C | 1 |
PWM | 2 |
I/O Interfaces | |
Analog Output | 2 |
Analog Input | 4 |
Digital Output | max. 13 |
Digital Input | max. 15 |
Fast Counter | 1 |
Board-to-board connector | DIL-40 socket or LGA |
Software | |
Operating System | SmartPLC by infoteam |
Programming Interface | Ethernet |
Programmable in | IEC 61131-3 |
Power Supply | |
Operating voltage | 3.3V +/-5% |
Optional | |
LCD Display | via SPI or I2C |
SD card | DIL40: on-board socket |
RTC | sysWORXX CTR-100 DIL40: no battery backup |
Guidelines | |
RoHS | yes |
Downloads
| Name | Type | Size | Action |
|---|---|---|---|
| S | |||
|
sysWORXX CTR-100 Utility Package sysWORXX CTR-100 Utility Package P/N 3912003 V1.02 includes driver software, system manual, baseboard schematic, IoT-Chip example | zip | 14 MB | Download |
|
SYS TEC electronic - specific extension for OpenPCS / IEC 61131-3 Version 7.1.2 RV1.00 - english | exe | 31 MB | Download |
|
OpenPCS IEC 61131-3 programming system Version V7.1.2 RV1.00 - english | exe | 136 MB | Download |
Ordering Information
Available order numbers:
| P / N | Description |
|---|---|
| 3390100 | sysWORXX CTR-100 DIL40 |
| 3390101 | sysWORXX CTR-100 LGA |
| KIT-175 | Development Kit sysWORXX CTR-100 DIL40 |
| KIT-176 | sysWORXX meshnet Kit CTR-100 DIL40 |
