Based on the successful USB CAN Interface designs, the USB-CANmodul16 version bundles 16 CAN-channels in one device, connected to the PC via two high-speed USB2.0 interfaces with up to 480Mbps. This USB CAN Interface allows a most comfortable, yet cost efficient way to transfer CAN-bus messages in distributed systems that require a centralized data collection, like used in automotive applications, research institutes or laboratories.
As all other versions of the SYS TEC USB CAN Interface series, the USB-CANmodul16 can support all kind of higher-layer CAN-based protocols as CAN messages are tunneled transparently, such as CANopen, SDS, DeviceNet or J1939.*
Its new 32-bit CPU core ensures reliable communication even at high busload, and provides precise message time stamps. The PC driver allows for easy plug&play installation and supports simultaneous operation of up to 64 CAN-channels on the same PC. With its high density of communication channels, the USB-CANmodul16 is ideal suited for servicing and maintenance tasks of CAN-bus systems.
The USB-CANmodul16 has been tested according to the EMC Directive 2014/30/EU.
* On software side for e.g. J1939 support our CANinterpreter Add On as well as J1939 protocol stack is required.
270 (310 with handles) x 440 x 44mm
|Operating temperature||0 to +55ºC|
|Humidity||10 to 95% non-condensing (VDE 0110)|
|Available CAN channels||16|
|PC connection||USB V2.0 high-speed up to 480 Mbps|
|CAN interface||16 CAN interface, high-speed CAN according ISO 11898-2, optical isolated|
|CAN transceiver||high-speed CAN: 82C251|
|CAN specification||CAN 2.0A (11-bit identifier)|
CAN 2.0B (29-bit identifier)
|CAN bit rate||10kbps to 1Mbps|
|CAN bus features||Remote frames|
Listen only mode
Time stamp for received messages
Receiving the transmit echo including time stamp
Automatically transmission of cyclical messages by the module
|Software support for Windows® OS||USB-CANmodul Control - Configuration tool for managing multiple USB-CANmodul devices|
PCAN View - a simple CAN monitor that allows for reception and transmission of CAN messages
|Programmers support for Windows OS||Comprehensive programmers API including demo source for Microsoft Visual C++, LabView, Visual Basic .NET|
CANopen API for .NET - based on SYS TEC CANopen Stack and allows for easy implementation of CANopen-enabled applications
|Programmers support for Linux OS||SocketCAN based API (Linux Kernel version 2.6.32 or higher)|
|Device driver||Windows® 10, 8.1, 8, 7 (32/64 bit), Linux|
|LED||LEDs for power supply, CAN state, CAN traffic|
|Power Supply||100 ... 240 VAC|
|Housing||1HU 19” rack-mounted|
USB-CANmodul Utility Disk - driver support for modules of 3rd (AT91) and 4th (STM32) generation|
P/N SO-387 - V5.16 - Driver for Windows® 8.1, 8, 7 (32/64 bit), LabView Please Note! This driver package does not support the obsolete versions GW-001 and GW-002. Please check our download area for getting driver support for these obsolete versions!
USB-CANmodul Utility Disk|
P/N SO-387 - V6.04 R1 - Driver for Windows® 10, 8.1, 8, 7 (32/64 bit), LabView Please Note! This driver package does not support the obsolete versions GW-001, GW-002 and AT91 (3rd generation) based hardware revisions of USB-CANmodul2/8/16 (P/N 3204003 Rev.02, 3204004, 3404001). Please check our download area for getting driver support for these obsolete versions!
CANopen API for .NET|
P/N SO-1088 - V5.60 - Release March 2015
Linux SocketCAN Driver for USB-CANmodul series|
Release Version V0.9.8