Smart Monitoring in the user workshop

Our user workshop on 09.09.2020 on the topic of Smart Monitoring

Condition monitoring is the key to avoiding machine failures and unplanned downtime. The more physical variables are included in the monitoring, the more comprehensive the overall picture of the system. For example, the analysis of structure-borne noise often requires additional measurement variables such as heat generation and energy consumption, and process parameters to enable context-related statements to be made. In practice, therefore, an overall measuring system is often used that includes not only the vibration sensors but also other wired sensors. For measurements on moving parts or over distributed surfaces, battery-powered wireless sensors are also suitable.

 

OBJECTIVE

The participants of the workshop will familiarize themselves with the basics of structure-borne sound analysis using a simple drive model and learn how the measured values recorded by the vibration sensor can be converted locally in the edge controller into a discrete frequency spectrum and visualized graphically. In addition, the participants will use other wired sensors, supplemented by radio-based Meshnet beacons. The workshop thus provides a comprehensive overview of the possibilities of condition monitoring.

 

TOPICS WITHIN THE WORKSHOP:

  • Edge- Controller and structure-borne sound analysis module
  • Access to wired sensors via Node-RED
  • Integration of Meshnet radio sensors
  • Data communication via MQTT
  • Fundamentals of structure-borne sound analysis using a simple drive model
  • practical recording of the vibration sensor data in the edge controller
  • Introduction to common programming and visualization tools
  • Evaluation and display of acceleration sensor data

 

The participants receive an introduction to vibration analysis using a simple drive model. How are the acquired measured values converted locally in the edge controller into a discrete frequency spectrum, graphically visualized? In addition, other wired sensors and radio-based Meshnet beacons are also evaluated.

 

TARGET GROUP

The workshop addresses developers and product managers of condition monitoring solutions, especially with the focus on vibration analysis for condition assessment of rotating machine parts.

 

PARTICIPANT INFORMATION:

  • Date: 09 September 2020
  • 10:00 to 16:00
  • Impulse lecture and theory with subsequent practical part
  • Own laptop desired
  • Maximum number of participants 20
  • participation fee 99,00 EUR
  • The participation fee includes conference documents and catering.
  • The fee can be offset against a Proof of Concept

 

Interested parties please register at iot@systec-electronic.com with the following information:

Last name, first name
Company
Position
Contact details, e-mail and phone

 

If you have any questions regarding the workshop, the SYS TEC electronic team will be happy to assist you at any time on 03765-386001108.