Automation meeting place Böblingen

Practical and to the point!

Our user workshop on 09.09.2020 on the topic of Smart Monitoring

Condition monitoring is the key to avoiding machine failures and unplanned downtime. The more physical quantities are included in the monitoring, the more comprehensive is the overall picture of the system. For the analysis of structure-borne noise, additional parameters such as heat generation and energy absorption and process parameters are often required to enable context-related statements. In practice, a complete measuring system is therefore often used, which in addition to vibration sensors also includes other wired sensors. Battery-powered wireless sensors are also available for measurements on moving parts or over distributed surfaces.


Using a simple drive model, the workshop participants will familiarize themselves with the basics of structure-borne sound analysis and learn how the measured values recorded by the vibration sensor can be locally converted into a discrete frequency spectrum in the Edge Controller and graphically visualized. The participants also use other wired sensors, supplemented by radio-based meshnet beacons. The workshop thus provides a comprehensive overview of the possibilities of condition monitoring.



  • Edge controller and structure-borne sound analysis module
  • Access to wired sensors via Node-RED
  • Integration of Meshnet radio sensors
  • Data communication via MQTT
  • Fundamentals of structure-borne sound analysis using a simple drive model
  • Practical acquisition of the vibration sensor data in the edge controller
  • Introduction to common programming and visualization tools
  • Evaluation and display of acceleration sensor data


The participants receive an introduction to vibration analysis based on a simple drive model. How are the measured values locally converted into a discrete frequency spectrum in the Edge Controller and graphically visualized? In addition, further wired sensors as well as radio-based meshnet beacons are evaluated.



The workshop is aimed at developers and product managers of condition monitoring solutions, in particular with a focus on vibration analysis for condition assessment of rotating machine parts.



  • Impulse lecture and theory with subsequent practical part
  • Own laptop desired
  • Maximum number of participants 20
  • Participation fee 99,00 EUR
  • The participation fee includes conference documents and catering.
  • The fee can be set off against a proof of concept.


If you are interested, please register at with the following information:

Last name, first
name Company
Position Contact
details, e-mail and telephone


The SYS TEC electronic team will be happy to answer any questions you may have about the workshop at any time on 03765-386001108.