sysWORXX Automation Series - CANopen I/O devices

The sysWORXX I/O modules are very compact and cost effective CANopen remote I/O extensions featuring a high density of industrial proven IOs. The modules come ready-to-deploy including all connectors, plugs and cables. Extensive internal diagnostic routines are implemented to ensure a most reliable and safe operation. The sysWORXX I/O modules implement CANopen slave devices according to CANopen communication profile CiA 301 with device profiles CiA 401 and CiA 404.

CANopen IO–X1    16DI/8DO

• Digital outputs:
  8 channels, 24VDC / 500mA high side switches with short circuit protection (covered by CANopen Emergency message)
• Digital inputs:
  16 channels, 24VDC galvanic isolated, 4 channels share same ground

CANopen IO–X2    24DI

• Digital inputs:
  24 channels
  24VDC
  galvanic isolated
  4 channels share one common ground

CANopen IO–X3    24DO

• Digital outputs:
  24 channels
  24VDC / 500mA
  high side switches with short circuit protection (covered by Emergency message)

CANopen IO–X4    8AI

• 8 analog input channels
  each configurable as ±10V or 4..20mA
  Resolution 12-bit (optional 14-bit)
  Accuracy < 0,5%
• Automatic self-calibration of ADC

CANopen IO–X5    8 Temp In RTD

• 8 analog input channels
  each configurable as PT100 or PT1000
  3-wire connection scheme
  Resolution 12-bit (optional 14-bit)
  Accuracy < 0,1K
• Automatic self-calibration of ADC

CANopen IO–X6    8AO

• 8 analog output channels
  each configurable as 0 ... +10V or 4..20mA
  Resolution 10-bit (optional 12-bit)
• short-circuit monitoring
• open-load monitoring (for current mode)

CANopen IO–X7    8 Temp In Thermocouple

• 8 inputs for Thermocouple sensors
• Each channel separately configurable for type E,J,K,L,R,S,T
• Resolution 12-bit (optional 14-bit)
• Accuracy ±0,2K
• Each channel state is indicated via LEDs