With our ECUcore-9263 we respond on growing requirements for HMI-enabled applications. Having in mind the ever present cost pressure and demands on performance, the ECUcore-9263 perfectly balances both. It provides a simple yet performance-optimized hardware platform combined with a production-ready, GUI-enabled operating system.
Module features:
| |
Main Features of ECUcore-9263 |
| Controller |
Atmel AT91SAM9263 with ARM926EJ-S Core |
| Frequency |
220MIPS at 200MHz, 240MHz internal PLL clock |
| RAM (default/max) |
32/64MiB SDR-SDRAM, 32-bit data-bus 1MiB Video-RAM (PSRAM) |
FLASH (default/max) |
16/64MiB NOR, 16-bit data-bus |
| On-board Peripherals |
DMA, MMU, hardware watchdog, temperature sensor, RTC, touchscreen controller |
| Interfaces |
|
| Fast Ethernet |
1x 10/100Mbps, on-board PHY |
| CAN |
1 |
| UART |
3 |
| USB |
2x USB 2.0 host, 12Mbps full-speed 1x USB 2.0 device, 12Mbps full-speed |
| SPI/I2C |
2/1 |
| Mass storage |
Micro-SD on-board, MMC/SD-card signals on board-to-board connector |
| LCD |
TFT-LCD interface brought out via CMOS and LVDS |
| Touch |
Resistive, 12-bit, 4-wire interface |
| Others |
SSC, AC97 |
| Operating Conditions |
Temperature: -40°C…+85°C Humidity: 10-90% RH, non-condensing |
| Power Supply |
3.3V +/- 5%, 0.3A max. |
| Dimensions/Weight |
78 x 54 mm, 20g |
| Board-to-board connector |
2x 2x 50 pin header socket, 1.27 mm pitch |
| Available on board-to-board connector |
CAN, 3 ASC, 1 DBGU/ASC, USB device, 2 USB host, I²C, 2 SPI, AC97, 2 SD-card, 18 DIO, Ethernet, TFT-CMOS, Touch, LVDS, 3 PWM/DIO, 4 Timer/Counter/DIO |
| RoHS compliant |
yes |
| Operating System |
Linux with X server and QT framework |
Integrated Development Environment (IDE) |
Pre-integrated Eclipse-based IDE with GNU C/C++ tool chain, source- and assembly-level debugger |
| Complementary Middleware |
CANopen Protocol Stack Source Code Ethernet POWERLINK Protocol Stack Source Code | |
|