ECUcore-5208
|
The ECUcore-5208 was designed and optimized for
typical low-cost applications such as point-of-sale and access control. The
board offers numerous communication interfaces and a NAND flash for mass data
storage. The address/data bus leading towards the outside provides the most
effective degrees of freedom for connecting own in-/output circuits.
| |
Main Features of ECUcore-5208 |
| Controller |
Freescale MCF5208 with ColdFire V2 Core |
| System Clock |
159MIPS at 166MHz |
RAM
(default/optional) |
32/16MB SDR-SDRAM |
FLASH
(default/optional) |
4/8MB NOR
64/32MB NAND |
| EEPROM |
32KiB |
| On-board Peripherals |
DMA, hardware watchdog, temperature sensor, RTC |
| Interfaces |
|
| Fast Ethernet |
1x 10/100Mbps, on-board PHY |
| CAN |
1 |
| UART |
3 |
| SPI/I2C |
1/1 |
| Operating Conditions |
Temperature: -40°C…+85°C
Humidity: 10-90% RH,
non-condensing |
| Power Supply |
3.3V +/- 5%, 1A max. |
Dimensions/
Weight |
72 x 51 x 7,5 (L x W x H in mm),
20g |
| Board-to-board connector |
2x 52 pin header socket, 2mm pitch |
| Available on
board-to-board connector |
CAN, I˛C, SPI, FlexBus, GPIO, 1 high-speed
counter input, 1 PWM/PTO output, Ethernet |
| RoHS compliant |
yes |
| Operating System |
µClinux |
Integrated Development
Environment
(IDE) |
Pre-integrated Eclipse-based IDE with GNU C/C++ tool chain,
source- and assembly-level debugger |
| Complementary Middleware |
CANopen® Protocol Stack Source Code
Ethernet POWERLINK
Protocol Stack Source Code |
|
|
|
Datasheet
Single Board Computer
|
|
|
|
|
Sitemap
Printversion
![ECUcore-5208](javascript:lupe("/cgi-bin/public/dia/dia_products.pl?img=/uploads/2481/ECUcore_5208.jpg&titel=ECUcore-5208"))
We appreciate your feedback!