ECUcore-1130
|
Core module with Infineon TC1130 processor
Equipped with four CAN
interfaces, a 10/100Mbps Fast Ethernet Controller and on-board FPGA, the
ECUcore-1130 is an ideal solution for embedded control applications that require
high computing power combined with high demands in networking.
| |
Main Features of
ECUcore-1130 |
| Controller |
Infineon TC1130, based on Tricore V1.2 |
| System Clock |
150 MHz |
RAM
(default/optional) |
64/32 MB SDR-SDRAM |
FLASH
(default/optional) |
128/16/32MB NOR |
| SERIAL FLASH |
2MB only for FPGA-Firmware |
| EEPROM |
32 KiB |
| FPGA Options |
Lattice LFE2-6 |
| On-board Peripherals |
16-channel DMA, MMU, hardware watchdog, temperature
sensor, RTC |
| Interfaces |
|
| Fast Ethernet |
10/100Mbps, on-board PHY |
| CAN |
4 |
| UART |
3 |
| SPI/I2C |
2/2 |
| Operating Conditions |
Temperature: -40°C…+85°C
Humidity: 10-90% RH,
non-condensing |
| Power Supply |
3.3V +/- 4%, 1.5A max. |
Dimensions/
Weight |
78 x 54 x 8 (L x W x H in mm),
20g |
| Board-to-board connector |
3x 120 pin header socket, 0,5 mm pitch |
| Available on
board-to-board connector |
CAN, 2x I2C, 2x SPI, 2x Micro Link Interface
(MLI), 3x 32bit General Purpose Timer Unit, Multi-purpose I/O signals, 2 16-bit
Capture and Compare Unit (CAPCOM6), USB Device 1.1
Interface, Ethernet |
| RoHS compliant |
yes |
| Operating System Support |
PxROS |
Integrated Development
Environment
(IDE) |
Pre-integrated Eclipse-based IDE with GNU C/C++ tool chain,
source- and assembly-level debugger |
| Complementary Middleware |
CANopen® Protocol Stack Source Code
Ethernet POWERLINK
Protocol Stack Source Code |
|
|
|
Datasheet
Single Board Computer
|
|
|
|
|
Sitemap
Printversion
![ECUcore-1130](javascript:lupe("/cgi-bin/public/dia/dia_products.pl?img=/uploads/2477/ECUcore_1130.jpg&titel=ECUcore-1130"))
We appreciate your feedback!