The on-chip FLASH and RAM makes the DIPmodul-F40 ideal suitable for application
where costs are a crucial part. This tiny yet highly cost-effective insert-ready
Single-board computer is based on the Fujitsu MB90F352S microcontroller. The
size of a 40-pin DIP device with single row SMD pin header connectors in 2.54 mm
pitch, the board is designed for use as a universal core component in a customer
application design.
Various port lines of the MB90F352S microcontroller are available to the
target application board on utilizable as IO as well as communications interface
alternatively. The DIPmodul-F40 is on-board programmable via bootstrap
bootloader. This allows the DIPmodul-F40 to be plugged into a target application
like a “big programmable chip”.
The on-chip Full-CAN controller and the various serial interfaces
(LIN,SPI,RS232) enables the DIPmodul-F40 to be used as network node within a CAN
system or as gateway unit between two field-bus systems.
Up to 32kB of
serial EEPROM memory is available for the non-volatile saving of process
variables and data. The FLASH is programmable on-board via serial interface.
External peripheral devices can be easily extended using the SPI bus. The
driver-software for the on-board peripheral devices are delivered in
source-code.
| 
Sitemap
Printversion
![DIPmodul-F40](javascript:lupe("/cgi-bin/public/dia/dia_products.pl?img=/uploads/1576/DIPmodul-F40_PV.jpg&titel=DIPmodul-F40"))
We appreciate your feedback!