You are here:  Home  Products  Embedded Hardware and Tools  COMBImodul-C14
Services
Sitemap Sitemap  Print Printversion

Advanced Search advanced search

Navigation
Home
Company
References
Products
IEC 61131-3 PLC Solutions
CANopen I/O Devices
CANopen Software & Tools
Powerlink Software & Tools
CAN Interfaces
Single Board Computer
Safety CANopen
Embedded Hardware and Tools
COMBImodul-C12
COMBImodul-C14
Order Information
IO-Box
USB-RS232 Adapter Cable
TMS320F28xx eZdsp Adaptor Board
Development Tools
Product catalog
Services
Downloads
Contact us
News & Events
Support

Events & Fairs

COMBImodul-C14

COMBImodul-C14 This compact controller is suitable as a decentral control and sensor / actor interface for scalable automation tasks based on the CANbus and Ethernet. The local peripheral can then be extended with decentral CANopen devices for example. The COMBImodule devices have a broad selection of I/Os for industry standard signals. Free programmable and configurable LED-bars and switches enable user inputs and display of status information. Software examples are part of the supply package.


Technical Features COMBImodul-C14

CPU core
  • Microcontroller Infineon XC161, clocked at 40MHz with integrted CAN controller
  • 32kByte + 2kByte EEPROM + 32kByte NV-SRAM
  • 1MByte Flash (max. 2MByte), 128kByte on-chip Flash
  • 1MByte RAM (max. 2MByte)
I/O configuration
  • 24 digital inputs 24VDC, galvanic isolated
  • 16 digital outputs 24VDC/0.5A (galvanic isolated, short-circuit proof)
  • 4 Relay outputs 250VAC/3A (3 NO, 1 NO/NC)
  • 4 analog inputs 0-10V (0-20mA)
  • 2 analog outputs 0-10V (short-circuit proof)
  • 3 high-speed inputs 24VDC/50kHz, galvanic isolated (counting direction selectable by software or dedicated I/O line)
  • 2 PMW outputs 24VDC/0.5A, galvanic isolated
  • RTC, battery backed
  • Watchdog
  • Status LEDs for I/O, diagnosis, power fail, network status
  • 8pos DIP-switch, 3pos switch, Hex-encoding switch
  • Connectors: removable spring-clamp type
Communication
  • 2 x High-speed CAN 2.0B interface, galvanic isolated
  • 1 x Ethernet 10BaseT
  • 2 x RS232 (RxD. TxD, GND)
  • 1 x RS-232 (including all Modem control lines)
Power supply
  • 2x 24VDC ± 20%, separated power supply inputs for CPU and I/O
  • Power consumption: typical 100mA
Enclosure
  • suitable for DIN/EN-rail mounting
  • Ingress protection level: IP20
  • Dimensions L/W/H: 160mm/75mm/95mm, wight: 350g




This page last updated: 25. January, 2010
Sitemap | Contact Us | Terms&Conditions |
© 2004 - 2010 SYS TEC electronic GmbH. All rights reserved.