Development Kit ECUcore-EP3C
/uploads/8a/f2/8af2aaa150af11738bdffcbf5d16315c/KIT-161-openPOWERLINK-Development-Kit-Collage-450x450.png /uploads/e1/c1/e1c141c0e999e4f790f0e2ebc86ba20a/4002010-Developmentboard-EP3C_0759-450x450.png /uploads/fa/a7/faa71bb264e5891bf66324d243ea4ac6/4001018-ECUcore-EP3C_1478-450x450.png

Development Kit ECUcore-EP3C


The ECUcore-EP3C Development Kit is a low-cost, high-performance method of evaluating the ALTERA Cyclone EP3C FPGA and ECUcore-EP3C System on Module (SOM). The Kit includes the ECUcore-EP3C, an application carrier board and accessories required to immediately begin development work.

The FPGA on the ECUcore-EP3C is preprogrammed with a stand-alone openPOWERLINK demo application running on a NIOS II Soft CPU. Besides the Soft CPU the FPGA configuration includes a seamlessly integrated openMAC, openHUB and the required system peripherals. The demo application achieves a POWERLINK timing of 400 µs cycle time, about 1 µs Poll Response latency and less than 1 µs synchronization jitter.

Features / Benefits

ECUcore-EP3C Highlights

  • Low-cost development kit
  • FPGA, memory and support circuitry integrated in an insert-ready SOM
  • Ready to run Board Support Package with openPOWERLINK reference application
  • Core software components openPOWERLINK, openMAC with Auto-Response feature and openHUB available as open source under BSD license
  • Customizable board connector pinout
  • Scalable functionality and performance
  • Extremely compact PCB form factor (78mm x 54mm)

KIT Content

Development Kit ECUcore-EP3C

  • ECUcore-EP3C - System on Module
  • Development Board ECUcore-EP3C
  • USB JTAG-programmer for Altera FPGA‘s
  • International power supply, 12VDC, 1500mA
  • RS232 cable, 1,8m
  • FTP patch cable Cat.5e, 2m
  • Leverage tool
  • ESD handling instructions
  • openPOWERLINK - Live-CD for x86
  • openPOWERLINK Protocol Stack Source Code with Altera Quartus II FPGA demo project for ECUcore-EP3C

Ordering Information

Available order numbers:

P/N Description
KIT-161 Development Kit ECUcore-EP3C
ECUcore-EP3C, Development Board ECUcore-EP3C, USB JTAG-programmer for Altera FPGA‘s, Power supply, Set of cables, openPOWERLINK - Live-CD for X86, CD with openPOWERLINK Source Code and Altera Quartus II FPGA demo project for ECUcore-EP3C