| Controller: | Atmel® AT91SAM9263 with ARM926EJ-S Core |
| System Clock: | 220MIPS at 200MHz, 240MHz internal PLL clock |
| RAM: | 64MiB SDR-SDRAM (32MiB optional),
32-bit data-bus |
| Video-RAM: | 1MiB dedicated |
| EEPROM: | 32kB (SPI) |
| FLASH: | 256MiB NAND - 64MiB NOR (128MiB optional), 16-bit data-bus |
| On-board Peripherals: | DMA, MMU, hardware watchdog, temperature sensor, RTC, touchscreen controller |
| Fast Ethernet: | 1x 10/100Mbps, on-board PHY |
| CAN: | 1 |
| UART: | 3 |
| USB: | 2x USB 2.0 host, 12Mbps full-speed
1x USB 2.0 device, 12Mbps full-speed |
| SPI/I2C: | 2/1 |
| Mass storage: | Micro-SD on-board, MMC/SD-card signals on board-to-board connector |
| LCD: | TFT-LCD interface brought out via CMOS and LVDS |
| Touch: | Resistive, 12-bit, 4-wire interface |
| Others: | SSC, AC97 |
| Operating Conditions: | Temperature: -40°C…+85°C
Humidity: 10-90% RH, non-condensing |
| Power Supply: | 3.3V +/- 5%, 0.3A max. |
| Dimensions/Weight: | 80 x 54 x 9,4 (L x W x H in mm), 20g |
| Board-to-board connector: | 2x 2x 50 pin header socket, 1.27 mm pitch |
| Available on board-to-board connector: | CAN, 3x ASC, 1x DBGU/ASC, USB device, 2x USB host, I²C, 2x SPI, AC97, 2x SD-card, 18x DIO, Ethernet, TFT-CMOS, Touch, LVDS, 3x PWM/DIO, 4x Timer/Counter/DIO |
| RoHS compliant: | yes |
| Operating System: | Linux with X server and QT framework |
| Integrated Development Environment (IDE): | Pre-integrated Eclipse-based IDE with GNU C/C++ tool chain, source- and assembly-level debugger |
| Complementary Middleware: | CANopen® Protocol Stack Source Code
Ethernet POWERLINK Protocol Stack Source Code |
)
)
)
