ECUcore-5208
/uploads/af/0e/af0e14b5d63347787b5fccff4e069479/4001006-ECUcore-5208_0924-450x450.png /uploads/be/81/be81288cdc473e586b167562c6f1fee1/4001006-ECUcore-5208_0925-450x450.png /uploads/b8/b4/b8b49f1423a9f689ba12d95a33adad9a/4001006-ECUcore-5208_0907-450x450.png

ECUcore-5208


The ECUcore-5208 is designed and optimized for typical low-cost applications such as point-of-sale and access control. The board offers numerous communication interfaces and a NAND flash for mass data storage. The address/data bus provides the most effective degrees of freedom for connecting own in-/output circuits.

Features / Benefits

Module features:

Controller:Freescale MCF5208 with ColdFire V2 Core
System Clock:159MIPS at 166MHz
RAM :32MB SDR-SDRAM (16MB optional)
FLASH:4MB NOR (8MB optional)
64MB NAND (32MB optional)
EEPROM:32KiB
On-board Peripherals:DMA, hardware watchdog, temperature sensor, RTC
Fast Ethernet:1x 10/100Mbps, on-board PHY
CAN:1
UART:3
SPI/I2C:1/1
Operating Conditions:Temperature: -40°C…+85°C
Humidity: 10-90% RH, non-condensing
Power Supply:3.3V +/- 5%, 1A max.
Dimensions/Weight:72 x 51 x 7,5 (L x W x H in mm), 20g
Board-to-board connector:2x 52 pin header socket, 2mm pitch
Available on board-to-board connector:CAN, I²C, SPI, FlexBus, GPIO, 1 high-speed counter input, 1 PWM/PTO output, Ethernet
RoHS compliant:yes
Operating System:µClinux
Integrated Development Environment (IDE):Pre-integrated Eclipse-based IDE with GNU C/C++ tool chain, source- and assembly-level debugger
Complementary Middleware:CANopen® Protocol Stack Source Code
Ethernet POWERLINK Protocol Stack Source Code

Ordering Information

Available order numbers:

P/N Description
4001006 ECUcore-5208, standard version
32MB RAM, 4MB Flash, 64MB NAND, 1xCAN, 2kB EEPROM
4001008 ECUcore-5208
16MB RAM, 4MB Flash, 256B EEPROM