With our PLCcore-9263 we respond on growing requirements for HMI-enabled applications. Having in mind the ever present cost pressure and demands on performance, the PLCcore-9263 perfectly balances both. It provides a simple yet performance-optimized hardware platform combined with a production-ready, GUI-enabled operating system.
Making PLC available as an insert-ready core module with small dimensions reduces effort and costs significantly for the development of user-specific controls. The PLCcore-9263 is also very well suitable as basic component for custom specific HMI devices as well as intelligent network node for decentralized processing of process signals (CANopen and UDP).
Features / Benefits
|PLCcore-9263:||OpenPCS, Linux, QT optional, CANopen, TCP/IP, program download and debugging via Ethernet and CANopen|
|PLCcore-9263 HMI:||OpenPCS, Linux, SpiderControl, CANopen, CANopen,TCP/IP, Program download and debugging via Ethernet and CANopen|
|Controller:||Atmel® AT91SAM9263 with ARM926EJ-S Core|
|System Clock:||220MIPS at 200MHz, 240MHz internal PLL clock|
|RAM:||64MiB SDR-SDRAM (32MiB optional),|
|FLASH:||256MiB NAND - 64MiB NOR (128MiB optional), 16-bit data-bus|
|On-board Peripherals:||DMA, MMU, hardware watchdog, temperature sensor, RTC, touchscreen controller|
|Fast Ethernet:||1x 10/100Mbps, on-board PHY|
|USB:||2x USB 2.0 host, 12Mbps full-speed|
1x USB 2.0 device, 12Mbps full-speed
|Mass storage:||Micro-SD on-board, MMC/SD-card signals on board-to-board connector|
|LCD:||TFT-LCD interface brought out via CMOS and LVDS|
|Touch:||Resistive, 12-bit, 4-wire interface|
|Operating Conditions:||Temperature: -40°C…+85°C|
Humidity: 10-90% RH, non-condensing
|Power Supply:||3.3V +/- 5%, 0.3A max.|
|Dimensions/Weight:||80 x 54 x 9,4 (L x W x H in mm), 20g|
|Board-to-board connector:||2x 2x 50 pin header socket, 1.27 mm pitch|
|Available on board-to-board connector:||CAN, 3x ASC, 1x DBGU/ASC, USB device, 2x USB host, I²C, 2x SPI, AC97, 2x SD-card, 18x DIO, Ethernet, TFT-CMOS, Touch, LVDS, 3x PWM/DIO, 4x Timer/Counter/DIO|
|Operating System:||Linux with X server and QT framework|
|Integrated Development Environment (IDE):||Pre-integrated Eclipse-based IDE with GNU C/C++ tool chain, source- and assembly-level debugger, IEC 61131-3 IDE (OpenPCS) with SYS TEC vendor extensions|
The on-board firmware of the PLCcore-9263 contains the entire PLC runtime environment including CANopen connection with CANopen master functionality. Thus, the module is able to perform human-machine communication as well as control tasks such as linking in- and outputs or converting rule algorithms. Data and occurrences can be exchanged with other nodes (e.g. superior main controller, I/O slaves and so forth) via CANopen network, Ethernet (UDP protocol) and serial interfaces (UART). Moreover, the number of in- and outputs either is locally extendable or decentralized via CANopen devices. For this purpose, the CANopen-Chip is suitable. It has also been designed as insert-ready core module for the appliance in user-specific applications.
The PLCcore-9263 provides 16 digital inputs (DI0...DI15, 3.3V level), 8 digital outputs (DO0...DO7, 3.3V level) as well as Scroll Wheel and 4x4 Matrix Keypad support. This default I/O configuration can be adapted for specific application requirements by using the Driver Development Kit (SO- 1103).Saving the PLC program in the on-board Flash-Disk of the module allows an automatic restart in case of power breakdown.
Programming the PLCcore-9263 takes place according to IEC 61131-3 using the OpenPCS programming system of the company infoteam Software GmbH (http://www.infoteam.de). This programming system has been extended and adjusted for the PLCcore-9263 by the company SYS TEC electronic GmbH. Hence, it is possible to program the PLCcore-9263 graphically in KOP/FUB, AS and CFC or textually in AWL or ST. Downloading the PLC program onto the module takes place via Ethernet or CANopen – depending on the firmware that is used. Addressing in- and outputs and creating a process image follows the SYS TEC scheme for compact control units. Like all other SYS TEC controls, the PLCcore-9263 supports backward documentation of the PLC program as well as the debug functionality including watching and setting variables, single cycles, breakpoints and single steps.
The integrated target visualization of the PLCcore-9263 is based on the SpiderControl MicroBrowser of the company iniNet Solutions GmbH (http://www.spidercontrol.net). It allows both, the display of process values from the PLC and the forwarding of user actions to the PLC (eg input via touch screen, matrix keypad and scrollwheel).
The PLCcore-9263 is based on Embedded Linux as operating system. This allows for an execution of other user-specific programs while PLC firmware is running. If necessary, those other user-specific programs may interchange data with the PLC program via the process image.
OpenPCS IEC 61131-3 programming system
Version V6.6.5 RV3.04 - english
SYS TEC - specific Extensions for OpenPCS / IEC 61131-3
Version 6.6.5 RV3.04 - english
+49 (0) 3765 / 38600-2110
SYS TEC Sales Channels
|System on Module - ECUcore Overview|
|PLCcore Concept - Whitepaper|
|PLCcore-9263 - System Manual|
|ECUcore-9263 - Hardware Manual|
|PLCcore-9263 - Product Flyer|
|Development Kit PLCcore-9263||»|
|Driver Development Kit ECUcore-9263||»|
- Industrial Communication
- System on Modules
- » Development Kits
- » Core Modules
- » Modules by Application
- » Programmable Automation Controllers
- » I/O Devices
- » Modules by Architecture
- » OS-level programmable Modules
- » IEC 61131-3 programmable Modules
- » VHDL programmable Modules
- » Development Kits
- Automation Components
- OEM Design Packages