PLCcore-9263 OpenPCS
/uploads/87/4d/874de80dcccf99d4ddfab73b1192d5fa/3390053_PLCcore-9263_1944-450x450.png /uploads/6f/b7/6fb75f7f757ffeff89bbbb4077b2b5f2/3390053_PLCcore-9263_1945-450x450.png /uploads/42/15/4215e00f24c6420c257adb64e1c182da/3390053_PLCcore-9263_1949-450x450.png

PLCcore-9263 OpenPCS

With our PLCcore-9263 we respond on growing requirements for HMI-enabled applications. Having in mind the ever present cost pressure and demands on performance, the PLCcore-9263 perfectly balances both. It provides a simple yet performance-optimized hardware platform combined with a production-ready, GUI-enabled operating system.

Making PLC available as an insert-ready core module with small dimensions reduces effort and costs significantly for the development of user-specific controls. The PLCcore-9263 is also very well suitable as basic component for custom specific HMI devices as well as intelligent network node for decentralized processing of process signals (CANopen and UDP).

Features / Benefits

Module Features

PLCcore Firmware:IEC61131-3
PLCcore-9263:OpenPCS, Linux, QT optional, CANopen, TCP/IP, program download and debugging via Ethernet and CANopen
PLCcore-9263 HMI:OpenPCS, Linux, SpiderControl, CANopen, CANopen,TCP/IP, Program download and debugging via Ethernet and CANopen
Controller:Atmel® AT91SAM9263 with ARM926EJ-S Core
System Clock:220MIPS at 200MHz, 240MHz internal PLL clock
RAM:64MiB SDR-SDRAM (32MiB optional),
32-bit data-bus
Video-RAM:1MiB dedicated
FLASH:256MiB NAND - 64MiB NOR (128MiB optional), 16-bit data-bus
On-board Peripherals:DMA, MMU, hardware watchdog, temperature sensor, RTC, touchscreen controller
Fast Ethernet:1x 10/100Mbps, on-board PHY
USB:2x USB 2.0 host, 12Mbps full-speed
1x USB 2.0 device, 12Mbps full-speed
Mass storage:Micro-SD on-board, MMC/SD-card signals on board-to-board connector
LCD:TFT-LCD interface brought out via CMOS and LVDS
Touch:Resistive, 12-bit, 4-wire interface
Others:SSC, AC97
Operating Conditions:Temperature: -40°C…+85°C
Humidity: 10-90% RH, non-condensing
Power Supply:3.3V +/- 5%, 0.3A max.
Dimensions/Weight:80 x 54 x 9,4 (L x W x H in mm), 20g
Board-to-board connector:2x 2x 50 pin header socket, 1.27 mm pitch
Available on board-to-board connector:CAN, 3x ASC, 1x DBGU/ASC, USB device, 2x USB host, I²C, 2x SPI, AC97, 2x SD-card, 18x DIO, Ethernet, TFT-CMOS, Touch, LVDS, 3x PWM/DIO, 4x Timer/Counter/DIO
RoHS compliant:yes
Operating System:Linux with X server and QT framework
Integrated Development Environment (IDE):Pre-integrated Eclipse-based IDE with GNU C/C++ tool chain, source- and assembly-level debugger, IEC 61131-3 IDE (OpenPCS) with SYS TEC vendor extensions


The on-board firmware of the PLCcore-9263 contains the entire PLC runtime environment including CANopen connection with CANopen master functionality. Thus, the module is able to perform human-machine communication as well as control tasks such as linking in- and outputs or converting rule algorithms. Data and occurrences can be exchanged with other nodes (e.g. superior main controller, I/O slaves and so forth) via CANopen network, Ethernet (UDP protocol) and serial interfaces (UART). Moreover, the number of in- and outputs either is locally extendable or decentralized via CANopen devices. For this purpose, the CANopen-Chip is suitable. It has also been designed as insert-ready core module for the appliance in user-specific applications.

The PLCcore-9263 provides 16 digital inputs (DI0...DI15, 3.3V level), 8 digital outputs (DO0...DO7, 3.3V level) as well as Scroll Wheel and 4x4 Matrix Keypad support. This default I/O configuration can be adapted for specific application requirements by using the Driver Development Kit (SO- 1103).Saving the PLC program in the on-board Flash-Disk of the module allows an automatic restart in case of power breakdown.

Programming the PLCcore-9263 takes place according to IEC 61131-3 using the OpenPCS programming system of the company infoteam Software GmbH ( This programming system has been extended and adjusted for the PLCcore-9263 by the company SYS TEC electronic GmbH. Hence, it is possible to program the PLCcore-9263 graphically in KOP/FUB, AS and CFC or textually in AWL or ST. Downloading the PLC program onto the module takes place via Ethernet or CANopen – depending on the firmware that is used. Addressing in- and outputs and creating a process image follows the SYS TEC scheme for compact control units. Like all other SYS TEC controls, the PLCcore-9263 supports backward documentation of the PLC program as well as the debug functionality including watching and setting variables, single cycles, breakpoints and single steps.

The integrated target visualization of the PLCcore-9263 is based on the SpiderControl MicroBrowser of the company iniNet Solutions GmbH ( It allows both, the display of process values from the PLC and the forwarding of user actions to the PLC (eg input via touch screen, matrix keypad and scrollwheel).

The PLCcore-9263 is based on Embedded Linux as operating system. This allows for an execution of other user-specific programs while PLC firmware is running. If necessary, those other user-specific programs may interchange data with the PLC program via the process image.


OpenPCS IEC 61131-3 programming system OpenPCS IEC 61131-3 programming system
Version V7.1.0 RV1.00 - english
134 MB
SYS TEC - specific Extensions for OpenPCS / IEC 61131-3 SYS TEC - specific Extensions for OpenPCS / IEC 61131-3
Version 7.1.0 RV1.00 - english
31 MB

Ordering Information

Available order numbers:

P/N Description
3390055 PLCcore-9263
incl. OpenPCS, Linux, program download via Ethernet
3390085 PLCcore-9263 - HMI
incl. Smart PLC/Open PCS, Linux, SpiderControl Target Visualization, program download via Ethernet and CANopen
3393000 License Spidercontrol Web Visualization