)
)
)
PLCcore-5208
The PLCcore-5208 is an insert-ready, low-cost and OEM-able Single Board Computer. The on-board firmware of the PLCcore-5208 includes the operating system µClinux and a pre-installed IEC 61131-3 runtime kernel with integrated CANopen Manager.
Features / Benefits
Module features:
| PLCcore Firmware: | IEC61131-3 runtime kernel pre-installed Shared process image CiA302/314 compliant CANopen manager Customizable I/O driver Program download via Ethernet or CANopen |
| Controller: | Freescale MCF5208 with ColdFire V2 Core |
| System Clock: | 159MIPS at 166MHz |
| RAM: | 32MB SDR-SDRAM (16MB optional) |
| FLASH: | 4MB NOR (8MB optional) 64MB NAND (32MB optional) |
| EEPROM: | 32KiB |
| On-board Peripherals: | DMA, hardware watchdog, temperature sensor, RTC |
| Fast Ethernet: | 1x 10/100Mbps, on-board PHY |
| CAN: | 1 |
| UART: | 3 |
| SPI/I2C: | 1/1 |
| Operating Conditions: | Temperature: -40°C…+85°C Humidity: 10-90% RH, non-condensing |
| Power Supply: | 3.3V +/- 5%, 1A max. |
| Dimensions/Weight: | 72 x 51 x 7,5 (L x W x H in mm), 20g |
| Board-to-board connector: | 2x 52 pin header socket, 2mm pitch |
| Available on board-to-board connector: | CAN, I²C, SPI, FlexBus, GPIO, 1 high-speed counter input, 1 PWM/PTO output, Ethernet |
| RoHS compliant: | yes |
| Operating System: | µClinux |
| Integrated Development Environment (IDE): | Pre-integrated Eclipse-based IDE with GNU C/C++ tool chain, source- and assembly-level debugger, IEC 61131-3 IDE (OpenPCS) with SYS TEC vendor extensions |
| Complementary Middleware: | CANopen® Protocol Stack Source Code Ethernet POWERLINK Protocol Stack Source Code |
Description
The PLCcore-5208 enables the integration of a compact and high-performance Hard PLC into customized, user-specific applications at minimal effort - without having to pay additional development or runtime license fees for the IEC 61131-3 runtime kernel. The board combines all high-speed components on a very compact, low-EMI-multilayer circuit board. Due to its comprehensive and high-performance software, it is suitable for various applications under industrial conditions.
The address/data bus lead to the outside offers to the user greatest possible degrees of freedom for designing in-/output circuits of the PLCcore-5208. Hence, the peripheral equipment of the module can be adjusted to respective requirements in a flexible way. The source code of the I/O driver is available as Driver Development Kit (DDK). This allows for implementing own I/O connections without intervention on the IEC 61131-3 runtime kernel. Realizing the process image as Shared Memory makes possible the easy, bidirectional data exchange with other µClinux programs running in parallel to the PLC.
The comprehensive CANopen library of the PLCcore-5208 includes a CiA 302-conform CANopen Manager. By supporting the automatic node configuration, it allows for flexible extensibility of the module via CANopen units and Plug & Play. Moreover, the PLCcore-5208 uses the CiA 314 device profile for "IEC 61131-3 programmable devices" (former CiA 405). Thus, easy data exchange with other CANopen modules is possible.
In addition to the CAN interface, the PLCcore-5208 features other numerous on-board communication interfaces. This provides for not only exchanging data and events with other nodes via CANopen network, but also via Ethernet and serial interfaces (UART) (e.g. superior central control, I/O slaves etc.). Hence, the module is well-suitable as central unit in distributed automation systems and as communication gateway. Filing the PLC program in the on-board Flash disk of the module allows for easy updating during runtime and autarchic restart after power breakdown.
Downloads
|
OpenPCS IEC 61131-3 programming system
Version V6.5.4 |
90 MB |
|
|
SYS TEC - specific Extensions for OpenPCS / IEC 61131-3
Version 6.5.4 RV3 |
14 MB |
Ordering Information
SYS TEC Sales Channels
Europe
| Germany |
SYS TEC electronic GmbH |
Phone: +49-(0)3661 627 90 |
Asia
| China |
SYS TEC electronic GmbH |
Phone: +86-10-51315760 |
Distributor Overview
Europe
| France |
PHYTEC France SARL |
Phone: +33-(0)2 43 29 22 33 |
| France |
I.S.I.T sarl |
Phone: +33 561 306900 |
| The Nederlands |
INDES |
Phone: +31-(0)345 - 545.535 |
| Russia |
SIMECS Ltd |
Phone: +7 (812) 677-0057 |
| Great Britain (UK) |
Hitex Ltd. |
Phone: +44-2476-692 066 |
| Italy |
FASE S.r.l. |
Phone: +39-(0)331 545 428 |
| Czech Republic |
MicroLand spol. s.r.o. |
Phone: +49-(0)8061 909440 |
North America
| USA / Canada |
PHYTEC America dba PHYtools |
Phone: +1 206-245-4327 |
Asia
| China |
Beijing Bocon Automation |
Phone: +86-10-51663110 |
| China |
Hongke Technology Co. Ltd |
Phone: +86 20 387430-30 |
| South Korea |
UPS Technology |
Phone: +82-2-447-8339 |
Australia
| Australia |
Embedded Logic Solutions Pty Ltd. |
Phone: +61 2 9687 1880 |
