Core Modules
SOM based on Freescale MCF5208 MCU with Coldfire V2 running at 166 MHz with Fast Ethernet, 3 UART, CAN, SPI, I²C and up to 32MB SDR-SDRAM and 8MB Flash
SOM based on the ECUcore-5208 hardware design with pre-integrated IEC 61131-3 runtime kernel, CiA® 302/314 compliant CANopen® Manager and Shared Process Image API
SOM based on Freescale MCF5484 MCU with Coldfire V4e core running at 200 MHz with 2 Fast Ethernet controller, PHY, 4 UART, 2 CAN, SPI, I²C and up to 128MB 32-bit DDR-SDRAM & 64MB Flash
SOM based on the ECUcore-5484 hardware design with pre-integrated IEC 61131-3 runtime kernel, CiA® 302/314 compliant CANopen® Manager and Shared Process Image API
SOM based on Infineon TC1130, Tricore V1.2 running at 150 MHz with Fast Ethernet/PHY, 3 UART, 4 CAN, USB device, 2 SPI, 2 I²C, 2 Micro Link Serial Bus (MLI), 2 16-bit Capture & Compare Unit (CAPCOM6) and up to 64MB 32-bit SDR-SDRAM and 128MB 32-bit Flash
SOM based on 32-bit Atmel AT91SAM9G20 running at 400 MHz with 1 Fast Ethernet controller, PHY, 4 UART, 1 CAN, SPI, I²C, 2 USB-Host, 1 USB-device and up to 64MiB SDR-SDRAM & 64MiB Flash
SOM based on the ECUcore-9G20 hardware design with pre-integrated IEC 61131-3 runtime kernel, CiA® 302/314 compliant CANopen® Manager and Shared Process Image API
SOM based on Atmel AT91SAM9263 running at 240 MHz with Fast Ethernet, 3 UART, CAN, SPI, I²C and up to 64 MiB SDR-SDRAM and 64MiB Flash, SSC, AC97, CMOS/LVDS-TFT-Interface, Video-RAM, Touch controller
SOM based on the ECUcore-9263 hardware design with pre-integrated IEC 61131-3 runtime kernel, CiA® 302/314 compliant CANopen® Manager and Shared Process Image API
SOM based on Intel® Atom™ Processor E660T running at 1,3GHz with Fast Ethernet/PHY, 4 UART, 1 CAN, USB host, USB device, 1 SPI, 1 I²C, 2 SATA, 2 PCIe, LVDS and serial DVO display support and up to 2GiB DDR2 RAM and 2GB NAND Flash
SOM based on Altera Cyclon III (EP3C25) with 2 Fast Ethernet, IP core (UART, CAN, SPI, I²C) and 2MB SRAM
The CANopen Chip F40 is populated with the Fujitsu MB90F352 controller and comes with the latest CANopen firmware pre-programmed. This enables use as a "plug and play" node in a CANopen network.
A cost effective single Chip CANopen IO solution, which features various IO configurations including digital and analog inputs and outputs.
Insert-ready SOM subassembly in DIP-40 dimensions with Infineon C164CI, 20MHz, 32KB SRAM, 128KB Flash, 2KB EEPROM, CAN
The on-chip FLASH and RAM makes the DIPmodul-F40 ideal suitable for application where costs are a crucial part.