CAN Dongle CAN Ethernet Gateway CAN Interface
CAN Interfaces CAN USB Adapter CAN USB Converter
CANopen CANopen IEC61131 CANopen IEC1131
USB CAN Gateway USB CAN Interface Verteilte Automatisierung
CAN USB Converter - Monitor a CAN network, write a CAN program and communicate with industrial, medical, automotive or other CAN based device
Fundamentals to CAN USB Converter:
The CAN USB Converter is a cost-efficient device for coupling the CAN-bus to the PC using the
standard USB interface. Nowadays the interface is present in every new PC and is supported by the
MS-Windows 98, Me, 2000 and XP operating systems. If you establish the connection between the CAN USB Converter
and the PC during the runtime of the computer, the PC automatically loads the relevant device driver (hot plug & play).
All CAN messages are transparently tunneled via the USB bus. Here, the maximum CAN-bus baud rate of 1 Mbit/s is
supported. The CAN messages are temporarily buffered by the CAN USB Converter. Transfer peaks are picked up.
The CAN USB Converter supports CAN specification 2.0A and 2.0B. Along with the standard CAN 82C251 transceiver
low speed CAN transceivers are also available such as TJA1041, TJA1054, AU5790, for example. Optionally,
transceiver types that are compatible with these can also be used. Additional transceivers can be easily
connected using the extra on-board socket on PCB. The transceivers can be utilized regardless of the
software; in other words, different transceivers can be operated using one application.
CAN Dongle CAN Ethernet Gateway CAN Interface
CAN Interfaces CAN USB Adapter CAN USB Converter
CANopen CANopen IEC61131 CANopen IEC1131
USB CAN Gateway USB CAN Interface Verteilte Automatisierung
|
