CAN Dongle CAN Ethernet Gateway CAN Interface
CAN Interfaces CAN USB Adapter CAN USB Converter
CANopen CANopen IEC61131 CANopen IEC1131
USB CAN Gateway USB CAN Interface Verteilte Automatisierung
CAN Ethernet Gateway - Connecting CAN Networks over the Internet
Fundamentals to CAN Ethernet Gateway:
Internet communication via TCP/IP is finding ever increasing
implementation in industrial applications. The CAN Ethernet Gateway
from SYS TEC electronic GmbH is a solution that enables
CAN networks to be coupled together over the Internet/Ethernet,
whereby remote monitoring and control is possible. The CAN Ethernet Gateway
controls networked communication and makes a
transparent CAN-based application interface available to the user.
The device supports a transparent, protocol-independent transfer of
the CAN messages, thus allowing its implementation into a wide
range of possible applications. Furthermore, the CAN Ethernet Gateway
can be used with various higher layer CAN protocols (e.g.
CANopen, SDS, J1939, DeviceNet or other proprietary protocols).
The CAN Ethernet Gateway can be used in CAN networks with a
transfer rate of up to 1 MBit/s corresponding to CAN Specification
2.0A (11-bit CAN identifier) and 2.0B (29-bit CAN identifier). For
each CAN message a time stamp can be created by the CAN Ethernet Gateway
that is transferred along with the data.
The CAN Ethernet Gateway can be configured via an asynchronous
serial interface (UART with RS-232 using hardware flow control) or
via a Telnet connection. The user can therefore adapt the functions of
the CAN Ethernet Gateway to the specific application environment.
CAN Ethernet Gateway - Internet communications using TCP/IP is increasing in the industrial sector. With the SYS TEC CAN Ethernet Gateway we provide you with a ready-to-use solution for transparent connection of CAN networks by existing Ethernet topologies. CAN messages are transferred transparently, regardless of the protocol used for communication. This makes the CAN Ethernet Gateway applicable for different high-layer protocols such as CANopen DeviceNet or SDS, for example. Access via Ethernet can be achieved both via TCP and UDP as well. In the process, a CAN Ethernet Gateway can manage up to 3 active connections simultaneously. This is how you can couple two or more CAN networks and simultaneously access the bus from the PC using a service application. CAN Ethernet Gateway is supplied with up to two CAN-bus interfaces. Easy-to-configure transmission-filters enable sensible limitation of the extent of the CAN messages to be transferred for each interface. The CAN Ethernet Gateway is intended for high data rates. Transfer peaks in the CAN networks are buffered. With very high data traffic, several CAN packets are consolidated for Ethernet transfer. Chronological transparence is ensured using time stamps, which are applied to every CAN message. We offer a driver solution for the PC. This makes it possible to easily use standard CAN software such as ProCANopen™, PCANExplorer™. Of course the CAN-Ethernet Gateway can be used with all CAN-bus related software offerd by SYS TEC. CAN Ethernet Gateway can be configured extensively and enables flexible adaptation to the respective application. The configuration is stored in so-called RC files. A number of RC files for different applications are included as templates in the supply package. You have access to the configuration shell via Telnet or the serial interface (RS 232). No special software is required on the PC.
CAN Dongle CAN Ethernet Gateway CAN Interface
CAN Interfaces CAN USB Adapter CAN USB Converter
CANopen CANopen IEC61131 CANopen IEC1131
USB CAN Gateway USB CAN Interface Verteilte Automatisierung
|
